Fusion Universal Refills

Instructions for use : Clean the tooth to be treated and adjacent teeth with a brush and prophy paste. Select the shade using VITA Shade Guide. Prepare the cavity using conservative cavity technique No residual amalgam or other base material should be left in the cavity. Cover the area close to the pulp with hard setting CAL-LC Light Cure Calcium Hydroxide paste. Apply Actino 37% Phosphoric Acid Etchant Gel for 15-20 sec. Remove Gel with vigorous water spray and rinse conditioned area for at least 10 sec. Blot dry conditioned area with a moist cotton pellet. Apply Fusion Bond 5 dentine bonding agent with a disposable brush to the entire cavity. Ensure thorough wetting of the entire cavity. Allow 20 sec air drying and re apply another coat of dentine bonding agent. Remove excess solvent by gently drying with dry air for at least 5sec to ensure uniform glossy surface. Cure adhesive for 20-30 sec using standard curing light. Remove Fusion syringe cap and dispense material onto a mixing pad. Place the material into the cavity using a clean unabraded instrument (teflon coated). After dispensing, screw plunger should be rotated anti clock wise by half to full turn to release residual pressure inside the syringe. Contour the  aterial in the cavity. Light cure for 40 sec using standard curing light. When necessary build in increments of 2mm maximum using a layering technique. Shape and polish using standard technique and at last stage apply Fusion Nano Coat protective varnish. The dispensed material shall not be placed back in container and the dose once applied and used shall not be reused.

Warnings : Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally. Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.

Precautions : Eugenol containing materials should not be used with this product because they may effect polymerization and interfere with the hardening process. Being sensitive to heat and light, the syringes should be kept away from direct sun light.

Contraindications : Do not use in patients, If allergic to methacrylate resins.

Storage Conditions : Store at temperature between 10°C(50°F) to 24°C(75°F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Shelf Life : 3 years from the date of manufacturing.