- 37% phosphoric acid
- For enamel etching & dentin conditioning
PACKAGING
- Liquid Packing : 1 x 10ml Squeeze Bottle
CE 0123
The product is audited & approved as per European standards and laws, and has a valid CE Certifications
MDSAP
MDSAP quality management system satisfies the regulatory jurisdictions requirements of MDSAP Countries.
CDSCO
Registered & Approved as per MDR 2017 Guidelines by Central Drugs Standard Control Organization
INDICATIONS
- For conditioning of both enamel and dentine surfaces before placing adhesive restoration
PRODUCT BENEFITS
- 37% phosphoric acid to give best dentine etching results
- Provides controlled depth of dental etch
- Does not dry etched tooth surface
| Technical Data | |
|---|---|
| 1. PH | < 1 |
| 2. Consistency | 29mm |
| 3. Thickness | 28mm |
Size1x10ml Bottle
Instructions for Use :
Clean the area to be etched, rinse and dry thoroughly. Place the tip against the surface to be etched and slowly dispense the liquid on the surface to lay a fine line or paint a thin layer to the areas to be etched. Allow the liquid to stay for 10-15 seconds and rinse thoroughly with water spray. Dry etched tooth surface with clean, dry air.
Precautions : The product contains phosphoric acid. It can burn and cause irritation to the tissues and therefore confine the use to areas to be etched. Avoid contact with eyes and prolonged contact with skin.
Warning : Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician.
Contraindications : The products contains 37% Phosphoric acid, so the product should not be used with patients who have a history of severe allergic reaction to any of the components.
Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf Life :
3years under proper storage.
Reviews
There are no reviews yet.