Crysta Bioactive

  1. Home
  2. Cements & Liners
  3. Crysta Bioactive

Crysta Bioactive

Radiopaque Hydroxyapatite Modified Glass Ionomer Restorative Cement
  • Hydroxyapatite modified GIC for restorations in primary & permanent teeth
  • Excellent tooth adhesion with sustained fluoride release
  • High compressive strength with good aesthetics


  • Powder – Liquid Kit : 1 x 15g Powder Jar, 1 x 10ml Liquid Bottle, 1 x Mixing Pad, 1 x Spoon, 1 x Instruction Manual.



CE approved
CE 0123
The product is audited & approved as per European standards and laws, and has a valid CE Certifications
MDSAP quality management system satisfies the regulatory jurisdictions requirements of MDSAP Countries.
CDSCO Registered
Registered & Approved as per MDR 2017 Guidelines by Central Drugs Standard Control Organization
type 9 bioactive glass ionomer cement
type 9 bioactive glass ionomer cement


  • Core build-up.
  • Restoration of primary teeth.
  • Cases where radiopacity is required.
  • Temporary endodontic fillings
  • Class I, limited Class II, temporary fillings, etc
  • As a base or liner.
  • Intermediate restoratives and base material for class I and II cavities using the sandwich technique.


  • Anticariogenic.
  • Tooth coloured.
  • Accelerated remineralisation.
  • Excellent chemical bonding to dentin and enamel.
  • Radiopaque for easy post operative diagnosis.
Technical Data Standard Applied
1. Ratio (Powder / Liquid) 2 : 3 ISO 9917-1
2. Mixing Time 35 – 40 Sec.
3. Setting Time 1.30 – 2 min.
4. Compressive Strength 150 MPa


There are no reviews yet.

Be the first to review “Crysta Bioactive”

Your email address will not be published. Required fields are marked *

Instructions For Use :

Powder And Liquid Dispensing :
a) The recommended powder to liquid ratio is 2 level scoops of powder to 2-3 drops of liquid.
b) For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.
c) Hold the liquid bottle vertically and squeeze gently.
d) Close bottles immediately after use.
e) Shake the powder bottle occasionally.

Mixing :
Dispense powder and liquid onto pad or glass slab. Divide the powder into 2 equal parts. Mix the first portion with all of liquid for 15-20 seconds. Incorporate the remaining portion and mix the whole thoroughly for 20 seconds.

Restorative Technique :
a) Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping, use ApaCal Art / Cal LC as a base or liner.
b) Wash and dry but do not desiccate. Crysta Dentin Conditioner is recommended to remove the smear layer.
c) Mix the required amount of cement. Higher temperatures will shorten working time.
d) Transfer cement to the preparation using a suitable placement instrument. Avoid air bubbles.
e) Form the contour.
f) Setting time is 1:30 to 2:00 minutes from start of mixing.
g) The dispensed material shall not be placed back in container and the dose once applied and used not be reused.

Warnings : Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally. Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue the use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.

Precautions :
1. Do not mix the powder or liquid of Crysta Bioactive with any other glass ionomer products.
2. Direct contact with eugenol-based products is to be avoided. Eugenol slows the setting of glass ionomer cements.

Contraindications : In rare cases, the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of product and refer to a physician.

Storage Conditions : Store at temperature between 10°C(50°F) to 24°C(75°F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Shelf Life : 3 years from the date of manufacturing.

Quick Cart

Add a product in cart to see here!