₹950.00
| Technical Data | |
|---|---|
| 1. Setting Time | 1 Min. |
| 2. Compressive Strength | 10 MPa |
1. Direct Pulp Capping : Under rubber dam isolation, complete cavity preparation. Rinse the site with sodium hypochlorite 1%. Bleeding may be controlled with a cotton pellet moistened with sterile saline. Gently dry preparation with cotton pellet. Avoid desiccation. Dispense equal volumes of base and catalyst pastes on the paper pad provided. Replace container caps. Mix thoroughly untiI a uniform color is achieved. Do not over-spatulate. Complete mixing within 10 seconds. Using the bait pointed applicator or similar instrument, place the mix directly on the exposed pulp. The mixed material will set in approximately 2-3 minutes. Setting time might be shorter in the mouth due to moisture and temperature. Remove any set excess from retention areas, enamel, and/or margins with a sharp spoon excavator or a bur. Place desired adhesive, base, and/or restoration following manufacturer’s directions. Assess the pulp vitality at regular intervals.
2. Indirect Pulp Capping : Under suitable isolation, complete cavity preparation and caries removal. Wash cavity thoroughly with water spray and air dry. Dispense and mix CalUltra components as outlined earlier. Apply mixed material to desired dentin surfaces .Following completion of set remove any set excess from retention areas, enamel, and/or margins with a sharp spoon excavator or a bur. Complete restoration per restorative material manufacturer’s directions for use.
Precaution :
1. This product is intended to be used as specifically outlined in the directions for use. Any use of this product inconsistent with the instructions for use is at the discretion and sole responsibility of the practitioner.
2. Wear suitable protective clothing, eyewear & gloves.
3. The solubility and essentially basic nature of CalUltra composition requires that it be used only in situations where it can be protected adequately from the intraoral environment. After the CalUltra has completely set cover with restorative material as per manufacturer’s directions. Do not leave it exposed to oral environment.
4. To achieve good results, use of a rubber dam or adequate isolation is recommended.
5. Pulpal hemorrhage must be controlled prior to the application.
6. CalUltra should be mixed in equal volumes for optimum performance. The mixed material should be homogenous and streak free prior to application.
7. Increased humidity and elevated temperature will reduce available work time and set time.
8. Containers should be tightly closed immediately after use.
9. Store with original caps tightly closed in a well ventilated place at or below room temperature not exceeding 24 C. Refrigerated storage is acceptable when not in use. Allow material to reach room temperature prior to use. Protect from moisture. Do not Freeze. Do not use after expiration date. CalUltra is a multiple dose container (Tube/Tube). Opening and closing of the container does not affect the shelf life of the device. The dispensed material shall not be placed back in container and the dose once applied and used shall not be reused. Do not interchange base and catalyst tubes caps.
Warning: Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally contact with the skin may cause irritation and hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue the use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.
Contraindications: CalUltra is contraindicated for use in patients with known allergies to any other if its components.
Storage Conditions: Store at temperature between 10°C to 24°C (50 °F to 75 °F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf Life: 3-years from the date of manufacturing.
Ashish –
While Calultra is primarily functional, it still offers decent aesthetic qualities. The liner is not intended to be visible after restoration, but it provides a smooth base for subsequent layers, enhancing the overall finish of the restoration. It’s worth noting that its color and opacity are appropriate for its intended use, ensuring compatibility with various restorative materials.
Mahir –
Calultra offers exceptional value for money, especially considering its effectiveness and ease of use. The pricing is competitive, making it an accessible option for dental practices of all sizes. Given its reliable performance and the positive outcomes reported by practitioners, it represents a solid investment for anyone looking to improve their restorative capabilities.
Satish –
This calcium hydroxide cavity liner excels in promoting pulp protection and facilitating dentin regeneration. Clinicians report excellent outcomes when using Calultra as a liner beneath restorations, helping to manage sensitivity and promote healing. Its effective sealing properties also contribute to its success in preventing bacterial infiltration, making it a reliable choice for various restorative procedures.
Aalok –
Calultra stands out for its user-friendly application. The product comes in a convenient, ready-to-use format, allowing for quick and easy dispensing. The consistency is just right for smooth application, making it simple to layer and mold in cavity preparations. Overall, it’s an efficient choice for dental practitioners, minimizing chair time.