Hiflex Base Plates

Instruction for Use :

Place the base plate on a gypsum model and heat it with laboratory burner flame. Soften the base plate with a fanned ame and press onto the plaster cast with your fingers. When heated through enough, the plate adheres to the gypsum model. Final adaptation can be carried out e.g., using a wet wiping cloth. After adaptation, cut the excessive parts of the plate with a hot modeling knife.

Precautions :

1. To prevent possible damage, never press an insufficiently heated base plate onto a plaster cast.
2. Move the ame round so as to avoid local overheating and deformation of the plate.

Contraindications : In rare cases, the product may cause irritation to some persons, if such reactions or experiences discontinue the use of the product and refer to physician.

Storage Conditions : Store in a cool and dry environment between 10°C to 24°C.

Shelf life : 3 years from date of manufacture.