Silane-X Gel

Instructions for Use (Cementation of ceramic restorations) :

• Clean the area to be cemented.
• Carefully etch the porcelain surface, rinse and dry as instructed.
• Apply Silane-X Gel Bond Enhancer with a mini brush tip to treated porcelain surface.
• Allow to dry for one minute. Apply gently moisture free air stream to accelerate drying.
• Apply bonding resin and proceed with restoration using composites or resin cements.

Instructions for Use (Intraoral repair) :

• Isolate the area to be repaired with a rubber dam.
• Gingival Barrier may be used to protect areas where etching is not desired.
• Carefully etch the porcelain surface, rinse and dry as instructed.
• Apply Silane-X Gel Bond Enhancer with a mini brush tip to treated porcelain surface. Allow to dry for one minute. Apply gently moisture free air stream to accelerate drying.
• Apply bonding resin and proceed with restoration using composites or resin cements.
• The dispensed material shall not be placed back in container and the dose once applied and used shall not be reused.

Warnings : Silane-X Gel contains flammable solvents. Keep away from ignition source.

Precautions :

• One must remove the tip & re-cap the syringe after each use. Always verify material flow prior to applying intraorally.
• Clinician and patient must wear protective eyewear.
• Avoid contact with skin, this may cause skin sensitization in susceptible persons.
• For professional use only.

Contraindications : Do not use in patients, If allergic to any of its components.

Storage Conditions : Store at temperature between 10°C(50°F) to 24°C(75°F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Shelf Life : 2 years from the date of manufacturing.