Microgel SF

Instruction of Use : Clean the area to be etched, rinse and dry thoroughly. Place the tip against the surface to be etched and slowly dispense the gel on the surface to lay a fine line or paint a thin layer to the areas to be etched. Allow the gel to stay for 10-15 seconds and rinse thoroughly with water spray. Dry etched tooth surface with clean, dry air.
Precautions : The product contains phosphoric acid. It can burn and cause irritation to the tissues and therefore confine the use to areas to be etched. Fix the applicator tip to the syringe and check the flow of gel before applying on the etching surface. Avoid contact with eyes and prolonged contact with skin.

Warning : Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe of f thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.
Storage: Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf Life : 3years from the date of manufacturing.