Crysta Silver

  1. Home
  2. Cements & Liners
  3. Crysta Silver

Crysta Silver

Radiopaque Silver Alloy-Glass Ionomer Restorative Cement
  • A pre-mixed silver alloy with gic for restorations of primary & permanent teeth
  • High compressive strength owing to spherical silver alloy
  • Excellent tooth adhesion & fluoride releasing properties

PACKAGING

  • Powder – Liquid Kit : 1 x 15g Powder Jar, 1 x 10ml Liquid Bottle, 1 x Mixing Pad, 1 x Spoon, 1 x Instruction Manual.

1,900.00

Quantity

CE approved
CE 0123
The product is audited & approved as per European standards and laws, and has a valid CE Certifications
MDSAP
MDSAP quality management system satisfies the regulatory jurisdictions requirements of MDSAP Countries.
CDSCO Registered
CDSCO
Registered & Approved as per MDR 2017 Guidelines by Central Drugs Standard Control Organization
silver reinforced glass ionomer cement
silver reinforced glass ionomer cement

INDICATIONS

  • Restoration of primary teeth
  • Cases where radiopacity is required.
  • Class I, limited Class II
  • Temporary fillings, etc
  • Long term temporary replacement of cusps
  • Class V restorations in non-aesthetic situations.
  • Restorative in the field using the ART technique.

PRODUCT BENEFITS

  • Intermediate restorative and base material for class I and II cavities using the sandwich technique.
  • High Compressive Strength and adhesion to the tooth.
  • Packable and condensable like amalgam without mercury.
Technical Data Standard Applied
1. Ratio (Powder / Liquid) 2 : 3 ISO 9917-1
2. Mixing Time 35 – 40 Sec.
3. Working Time 1.30 – 2.00 min.
4. Setting Time 4 – 5 min.
5. Compressive Strength 150 MPa

Reviews

There are no reviews yet.

Be the first to review “Crysta Silver”

Your email address will not be published. Required fields are marked *

Instructions for Use :

As the product is pre mixed silver alloy glass ionomer cement so no need to add alloy separately

Powder and Liquid Dispensing :

a) The recommended powder to liquid ratio is 2 level scoops of powder to 2 – 3 drops of liquid.

b) For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.

c) Hold the liquid bottle vertically and squeeze gently.

d) Close bottles immediately after use.

e) Shake the powder bottle occasionally.

Mixing : Dispense powder and liquid onto pad or glass slab .Divide the powder into 2 equal parts. Mix the first portion with all of liquid for 15 – 20 seconds. Incorporate the remaining portion and mix the whole thoroughly for 20 seconds.

Note : A heavy consistency is recommended.

Restorative Technique :

a) Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping, use Apacal Art / Cal LC as a base or liner.

b) Wash and dry the prepared tooth structure but DO NOT DESICCATE. CRYSTA DENTIN CONDITIONER is recommended to remove the smear layer.

c) Mix the required amount of cement. Working time is 1min. 30 seconds at 23°C (73.4°F). Higher temperatures will shorten working time.

d) Remove surface moisture but DO NOT DESICCATE.

e) Transfer cement to the preparation using a suitable placement instrument. Avoid air bubbles.

f) Form the contour.

g) Setting time is 5:00 to 5:30 minutes from start of mixing.

h) The dispensed material shall not be placed back in container and the dose once applied and used not be reused.

Warnings : Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally. Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.

Precautions :

  1. Use of protective gloves is recommended.
  2. Direct contact with eugenol-based products is to be avoided as eugenol slows the setting of this products.

Contraindications :

  1. Pulp Capping
  2. In rare cases, the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of product and refer to a physician.

Storage Conditions : Store at temperature between 10°C(50°F) to 24°C(75°F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Shelf Life : 3 years from the date of manufacturing.

Quick Cart

Add a product in cart to see here!
0