Instructions for use :
a. Preparation : Preparation of newly places restorations
1) Finish the restoration with a superfine diamond bur. Alternatively, polish the surface according to the manufacturer’s instructions.
2)Spray preparation dust away with water. Dry by gently blowing with oil free air. Note: Surfaces to be coated should appear dry.
Preparation of existing restorations :
1)Roughen the surfaces to be coated with a superfine diamond bur.
2)Spray preparation dust away with water. Dry by gently blowing with oil free air.
Note : Surfaces to be coated should appear dry.
Preparation of marginal area :
Non cut enamel should be treated with a 37% phosphoric acid according to the manufacturer’s instructions. Rinse and dry with oil free air. Notes : Surfaces to be coated should appear dry.
b. Dispensing : Dispense a few drops into a disposable dispensing dish. Replace bottle cap immediately after use.
c. Applications : IMMEDIATELY apply (when 1 minute after dispensing) to the surfaces to be coated using micro applicator. DO NOT AIR BLOW. Note : If the coated surface be contaminated with water, blood or saliva prior to light curing, wash and dry the surface and repeat the coating procedure.
d. Light curing : 1. IMMEDIATELY light cure all coated surfaces with a visible light curing unit for 20- 40 sec (>500mW/cm2).
Note : 1) Place light source as close as possible to the coated surface. 2) If surface is tacky or yellowish, repeat light curing. 3) Use a protective light shield or similar protective eye wear during light curing.
Warning : Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally. Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.
Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf life : 3 years from date of manufacturing
Reviews
There are no reviews yet.