Packaging:
- 1 x 140g Base Paste
- 1 x 70g Catalyst Paste
- 1 x Instruction Manual
CDSCO
Registered & Approved as per MDR 2017 Guidelines by Central Drugs Standard Control Organization
CE 0123
The product is audited & approved as per European standards and laws, and has a valid CE Certifications
INDICATIONS
- Impressions for completely edentulous cases
- Impressions for partially edentulous distal extension.
- Relining of denture base.
PRODUCT BENEFITS
- Good detail reproduction
- Dimensionally stable
- Easy manipulation
- Optimal consistency
Instructions for Use:
1. Instruct the patient to rinse the mouth thoroughly to remove excess saliva. Lightly lubricate the patient’s
lips and mouth corners with petroleum jelly.
2. Dispense equal length of base and catalyst pastes on a mixing pad. Use stainless steel spatula for
mixing the pastes for 30-40 seconds until uniform consistency is obtained.
3. The mixture is transferred into previously made impression tray. Place the tray in patient’s mouth. Begin
muscle trimming in the usual manner approximately for 30 seconds after seating the impression tray. The
paste sets hard in 3-4 minutes approximately. Verify complete set and remove the impression tray.
4. Make the patient rinse thoroughly with water to ensure no residues are left in the oral cavity. The
dispensed material shall not be placed back in container and the dose once applied and used shall not be
reused.
Precautions:
1. The product is intended to be used by the qualified dental professionals only.
2. Do not leave residues of the impression material in the oral cavity.
3. Replace the cap tightly onto the respective tubes, that is, base paste cap on base tube and catalyst paste
cap on catalyst tube immediately after use
Storage Conditions:
Store at temperature between 10°C(50°F) to 24°C(75°F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf Life:
3 years from the date of manufacturing.
Reviews
There are no reviews yet.